Enter the size of the patio and your own prices. Get the quantities to order, with the working shown, and the cost and price of the job in pounds.
A patio costs the materials under and on it, the labour to dig, lay and point it, the waste taken away, and the builder's markup. This calculator works out each quantity from the size you enter, prices it with your own figures, and shows the working. For a 5 m by 4 m sandstone patio at the example prices, the cost is £2,811 and the price is £3,373.
Once the price is worked out, put it on paper with the free landscaping quote template, or the fencing quote template if the job has a fence run.
| Source | Figure | What it covers |
|---|---|---|
| Universal Paving | £50 to £80 per m² | Labour only, for laying a patio |
| Universal Paving | £2,200 to £3,200 | A 20 m² sandstone patio, professionally installed |
| Best Builders | £2,400 to £4,600 | A 20 m² patio fully installed, by paving type |
Figures as published by each source, checked 11 November 2026. They are those sites' estimates, not ours.
| Quantity | Formula | Where the figure comes from |
|---|---|---|
| Dig depth | paving + bed + sub-base | Pave Direct: the depth is the sum of the layers |
| Soil to remove | area × dig depth × 1.3 (1.25 for topsoil) | Pavingexpert: dug material bulks up by 20 to 30% |
| Skips | loose volume ÷ 6.1 m³, rounded up | An 8-yard skip holds 6.1 m³ |
| Type 1 sub-base | area × depth × 2.1 t/m³ | Pave Direct: compacted Type 1 is about 2.1 tonnes per cubic metre |
| Sharp sand | area × bed × 1.1 × 1.6 t/m³ | 1.6 tonnes per cubic metre, as stated by Kebur; 10% waste |
| Cement | sand volume ÷ mix × 1.45 t/m³ | Breedon's data sheet: settled bulk density 1,300 to 1,450 kg/m³ |
| Paving | area × (1 + waste) | 5 to 10% for cuts is the usual allowance |
| Jointing compound | joint length × width × depth × 1.8 t/m³ | Azpects EASYJoint data sheet: density 1.80 g/cm³; a tub covers 13 to 14 m² of 600 mm slabs at 5 mm joints |
The mortar bed default of 35 mm and the 8:1, 6:1 and 3:1 mixes follow Pavingexpert's bedding guidance; the 100 mm sub-base for a patio follows its sub-base table, which gives 75 to 100 mm for patios and 100 to 150 mm for driveways.
A 5 m by 4 m patio (20 m²) in 22 mm sandstone on a 35 mm bed over 100 mm of Type 1, at the example prices. The prices are illustrations.
| Item | Quantity | Cost |
|---|---|---|
| Soil to remove | 3.14 m³ in the ground, 4.08 m³ loose: 1 skip | £300 |
| Type 1 sub-base | 4.20 tonnes: 5 bulk bags | £275 |
| Sharp sand | 1.23 tonnes: 2 bulk bags | £100 |
| Cement, 6:1 | 0.19 tonnes: 8 bags | £56 |
| Paving | 22 m² with 10% waste | £660 |
| Jointing compound | 13.1 kg: 2 tubs | £70 |
| Other costs | Plant hire and delivery | £150 |
| Labour | 2 people × 3 days × £200 | £1,200 |
| Cost | £2,811 | |
| Price at 20% markup | Margin 16.7% | £3,373 |
Markup is profit as a percentage of cost. Margin is profit as a percentage of the price. A 20% markup is a 16.7% margin, not 20%. The calculator takes a markup and shows the margin it gives, so the two are never confused.
Formulas and sources checked 11 November 2026. This is a guide for estimating, not professional advice: check quantities against the site and the product's own data sheet before you order.
Published figures vary. Universal Paving puts labour at £50 to £80 per m² and a professionally laid 20 m² sandstone patio at £2,200 to £3,200. Best Builders gives £2,400 to £4,600 for a 20 m² patio, depending on the paving. Both were checked on 11 November 2026. Your own figure depends on the paving, the ground, the access and local labour rates, which is what the calculator lets you set.
Multiply the area by the compacted depth and by 2.1 tonnes per cubic metre. At the usual 100 mm for a patio, that is about 0.21 tonnes per square metre, so a 20 m² patio needs about 4.2 tonnes, or five 850 kg bulk bags. Driveways use 150 mm.
Multiply the area by the bed depth to get the volume of sand, add 10% for waste, and multiply by 1.6 tonnes per cubic metre. For a 20 m² patio on a 35 mm bed that is about 1.23 tonnes of sharp sand. At a 6:1 mix it needs about 0.19 tonnes of cement, which is eight 25 kg bags.
Soil takes up about 30% more room once it is dug. A 20 m² patio dug 157 mm deep is 3.14 m³ in the ground and about 4.1 m³ loose, which fits one 8-yard skip (6.1 m³). That soil weighs about 6 tonnes, so ask the skip firm for its weight limit before you book.
The calculator works without VAT and then adds 20% if you tell it the business is VAT-registered. A homeowner compares the total they pay, so a quote should say plainly whether VAT is included.
Yes. Put in your own material prices, your crew, your days and your day rate, then set your markup. The result shows your cost, your price and your margin, with the working for every quantity so you can check it against the site.